DJI AUTHORISED RETAIL STORE

Certified repairs centre

After sales Support

Raptor SR for Inspire 1 Series

Get It Now, Pay Later

Buy Now
Product Description

4Hawks Raptor SR Range Extender designed for DJI Inspire 1

Raptor range extender increases your drone’s flight range. From now on you can reach up to three times further than with standard antennas. All materials were precisely selected and all elements were designed diligently. The radio transparent radome is made by advanced injection moulding process.

Mounting system is made of stainless steel and doesn’t contain any removable parts that can be easy to lose. Thanks to dedicated mechanism, the operator can easily and smoothly adjust tilt of the antenna.

Dji Inspire 1 is a high quality drone. The basic kit allows for up to 30 minutes of uninterrupted flight, maximum speed of 60km/h. The Drone is targeted for professional movie makers.

4Hawks antenna for Dji Inspire 1 model is operating in 2.4GHz with 9dBi gain with additional antenna installed inside controller working in 5GHz frequency that allows operating the drone with 2 controllers.

Entire construction is 100% UV protected to assure longevity of the equipment. Additionally, part of the construction is made of aluminum to make the whole construction as light as possible. Mounting is made of stainless steel for rock solid stability.

Mounting the range extender is easy and doesn’t require professional assistance. The entire set is lightweight and uniform (without any loose equipment pieces). Changing the direction of the antenna shouldn’t cause any difficulties, as the system was designed in a way that allows quick position change with just a single “click” to 5 different positions. This way you can be sure that you do not lose the connection with your drone.

antena-do-description.jpg

Extender Flight Range

Extender Flight Range

Noise removal from other devices

Noise removal from other devices

Improved video signal

Improved video signal

Adjustable signal direction

Adjustable signal direction

High quality, lightweight design

High quality, lightweight design

Complete solution

Complete solution

Separate-light-line.jpg

Specification

electrical & mechanical parameters of Raptor range extender.

Electrical parameters

Frequencies
Port 1:   2.40 – 2.50 GHz

Port 2:   2.40 – 2.50 GHz

Gain
Port 1:   9 dBi  (+/- 1 dBi)

Port 2:   9 dBi  (+/- 1 dBi)

VSWR
Port 1:   < 1.50  (max. < 2.30)

Port 2:   < 1.50  (max. < 2.30)

Beamwidth
Port 1:   70°/65°

Port 2:   70°/65°

Polarization
Port 1:   Vertical

Port 2:   Vertical

Impedance
Port 1:   50 Ω

Port 2:   50 Ω

Mechanical parameters
Material
Antenna:   Samsung ABS, polyurethane, aluminum, Stainless steel, Nylon, FR4 PCB

Mounting:   Stainless steel + paint

Weight
~ 200g (110g Antenna + 90g Mounting)
Dimensions
16.1 x 9.1 x 1.7 cm

6.34 x 3.60 x 0.67 inch

Connection
Port 1:   RP-SMA female

Port 2:   RP-SMA female

Tilt adjustment
5 tilt positions, OnClick system
Mounting type
QuickAttach
In the box
Accesories included to the Raptor range extender antenna

Range extender antenna

Range extender antenna

2x Dedicated for Phantom MMCX pigtails

2x Dedicated for Phantom MMCX pigtails

Stainless steel mounting kit

Stainless steel mounting kit

screwdriver (Philips) + 8mm wrench + hex 1,5mm

screwdriver (Philips) + 8mm wrench + hex 1,5mm

2x RP-SMA male RG316 white pigtails

2x RP-SMA male RG316 white pigtails

Plots
VSWR, Separation between connectors & characteristic patter of Raptor antennas

Raptor SR for DJI Phantom 4 & 4 Adv 2.4 GHz Port 1 & Port 2, Radiation Pattern.png

Raptor SR for DJI Phantom 4 & 4 Adv 2.4 GHz Port 1 & Port 2, Radiation Pattern Azimith.png

Raptor SR for DJI Phantom 4 & 4 Adv 2.4 GHz Port 1, VSWR.png

Raptor SR for DJI Phantom 4 & 4 Adv 2.4 GHz Port 2, VSWR.png

Raptor SR for DJI Phantom 4 & 4 Adv 2.4 GHz Port2-Port1, Port Isolation.png

Raptor SR for DJI Phantom 4 & 4 Adv 2.4 GHz Port 1 & Port 2, Radiation Pattern Elevation.png

Raptor SR for DJI Phantom 4 & 4 Adv 2.4 GHz Port 1, Smith Chart.png

Raptor SR for DJI Phantom 4 & 4 Adv 2.4 GHz Port 2, Smith Chart.png

Separate-light-line.jpg

Tutorials

Video tutorial with modification of the controller